Autodesk releases a new version of its flagship design software AutoCAD every year, as it has since AutoCAD 2004 came out in 2003. This yearly cycle poses a dilemma for CAD and IT managers because new software may require new hardware. Before you install AutoCAD 2013, you need to know if your current hardware can handle it. Budgets are tight (when aren't they?), and production cannot stop.
Here are some steps that you can take to make sure your hardware is up to snuff to run AutoCAD 2013.
Assess Your Needs
First off, if you are currently running AutoCAD 2010, 2011, or 2012 and are completely happy with the performance of your hardware, then 2013 will probably run fine for you. If it has been three or more years since your last hardware update, it is time to look at your hardware needs. Three years doesn’t mean you will have to update your hardware, but it is a good time to assess your needs.
Start off by spec’ing out your current hardware. What operating system are you running? Are you using a Mac or a PC? Are you using the current version of your OS?
At this time, AutoCAD 2013 does not support the latest version of Mac OS — OS X Mountain Lion. An update for this should come out soon enough though. Also, Windows 8 (due in late October 2012) is not currently supported either. This doesn't mean it won't work, it just means that Autodesk does not guarantee that it will work or work properly. Keep the OS in mind.
If you are using a 32-bit version of Windows, consider updating your OS to a 64-bit version. AutoCAD 2013 comes in both versions, but the 64 bit version will perform better.
Minimum vs. Recommended System Requirements
Autodesk has system requirements for AutoCAD 2013. There are two categories; minimum and recommended. Each category contains lists for 32- and 64-bit systems as well as for 3D requirements. Take the minimum requirements literally. These are the minimum specs you need to turn on AutoCAD. Running with these specs in production will be painful at best.
You will be better served if you treat the recommended specifications as the minimum requirements. If your current hardware meets the recommended specifications, or exceeds them, then it is likely you will be ok. But do you want to work on a level of production that is "ok"?