---
title: Russell Bettenay - 2014-08-13 11:07:05
description: Russell Bettenay - 2014-08-13 11:07:05
---

[![Cadalyst](https://blog.cadalyst.com/hs-fs/hubfs/Editorial%20-%20Misc/cadalyst_logo.gif?width=198&height=70&name=cadalyst_logo.gif "Cadalyst")](https://www.cadalyst.com)

![Cadalyst_logo-trans.png](https://blog.cadalyst.com/hs-fs/hub/251891/file-25772071.png?width=270&name=file-25772071.png "Cadalyst_logo-trans.png")

- [About Us](https://www.cadalyst.com)
- [Contact Us](https://www.cadalyst.com)

[![CADspeed -- Optimizing Hardware for CAD Software](https://blog.cadalyst.com/hs-fs/hubfs/CADspeed_header_red.jpg?width=936&name=CADspeed_header_red.jpg "CADspeed -- Optimizing Hardware for CAD Software")](https://cadalyst-2.hs-sites.com/cadspeed)

## [Russell Bettenay - 2014-08-13 11:07:05](https://blog.cadalyst.com/cadspeed/d784e8d6810da4d2fdae1350474ff225)

Posted by [mediashower1](https://blog.cadalyst.com/cadspeed/author/mediashower1)

 Aug 13, 2014, 7:07:05 AM

- [Tweet](https://twitter.com/share)

I hope you could help me please find a printer which will print output from Drafix Cad Ultra. Which I have used sine 1993 for 2 d office layout plans.  
 The program is DOS and the drawings were saved as dwg. Not autocad and converted by a local s / w program called Printit. My epson Stylus 1000 has gone to gad and cannot be repaired I need a new reasonable printer as at 81 yo I am not going to get a lot of work but would still like to draw plans for family and friends.  
 I would appreciate your advice as the new printers seem to be only getting input from Windows. Sh rely there is still one which can either convert the Drafix drawing files to is it GD1 which then would work  
 Please help. Thanks. Russell  
 My tel is 0732787899. 0411889030  
 Or 26 Murray Place. Forest Lake Brisbane Queensland. Australia. 4078

 AUTHOR: Russell Bettenay  
 AUTHOR EMAIL: randlbettenay8@bigpond.com  
 AUTHOR URL:  
 SUBJECT: \[CADspeed\] Contact Us  
 IP: 101.165.198.139  
 Array  
 (  
 \[Name\] => Russell Bettenay  
 \[Email\] => randlbettenay8@bigpond.com  
 \[Website\] =>  
 \[Comment\] => I hope you could help me please find a printer which will print output from Drafix Cad Ultra. Which I have used sine 1993 for 2 d office layout plans.  
 The program is DOS and the drawings were saved as dwg. Not autocad and converted by a local s / w program called Printit. My epson Stylus 1000 has gone to gad and cannot be repaired I need a new reasonable printer as at 81 yo I am not going to get a lot of work but would still like to draw plans for family and friends.  
 I would appreciate your advice as the new printers seem to be only getting input from Windows. Sh rely there is still one which can either convert the Drafix drawing files to is it GD1 which then would work  
 Please help. Thanks. Russell  
 My tel is 0732787899. 0411889030  
 Or 26 Murray Place. Forest Lake Brisbane Queensland. Australia. 4078  
 )

# From the Editors of

![Celebrating30years_Logo.wTagline-2.png](https://blog.cadalyst.com/hs-fs/hub/251891/file-2070887635.png?width=204&name=file-2070887635.png "Celebrating30years_Logo.wTagline-2.png")

[![CADspeed RSS Feed](https://blog.cadalyst.com/hs-fs/hubfs/CADspeed/rss_feed_cadspeed-230256-edited.jpg?width=30&name=rss_feed_cadspeed-230256-edited.jpg "CADspeed RSS Feed")](https://blog.cadalyst.com/cadspeed/rss.xml)

### Subscribe to Email Updates

![cadspeed_spacer.gif](https://blog.cadalyst.com/hs-fs/hubfs/cadspeed_spacer.gif?width=278&name=cadspeed_spacer.gif "cadspeed_spacer.gif")

Looking for something?

Search

![cadspeed_spacer.gif](https://blog.cadalyst.com/hs-fs/hubfs/cadspeed_spacer.gif?width=278&name=cadspeed_spacer.gif "cadspeed_spacer.gif")

### Recent Posts

![cadspeed_spacer.gif](https://blog.cadalyst.com/hs-fs/hubfs/cadspeed_spacer.gif?width=278&name=cadspeed_spacer.gif "cadspeed_spacer.gif")

### Posts by Topic

- [Workstations (175)](https://blog.cadalyst.com/cadspeed/topic/workstations)
- [CAD (167)](https://blog.cadalyst.com/cadspeed/topic/cad)
- [Hardware (125)](https://blog.cadalyst.com/cadspeed/topic/hardware)
- [AutoCAD (58)](https://blog.cadalyst.com/cadspeed/topic/autocad)
- [Graphics Cards (57)](https://blog.cadalyst.com/cadspeed/topic/graphics-cards)
- [Graphics Card (52)](https://blog.cadalyst.com/cadspeed/topic/graphics-card)
- [GPU (49)](https://blog.cadalyst.com/cadspeed/topic/gpu)
- [Processors (48)](https://blog.cadalyst.com/cadspeed/topic/processors)
- [Connectivity (43)](https://blog.cadalyst.com/cadspeed/topic/connectivity)
- [Hard Drive (42)](https://blog.cadalyst.com/cadspeed/topic/hard-drive)
- [RAM (38)](https://blog.cadalyst.com/cadspeed/topic/ram)
- [Video Cards (38)](https://blog.cadalyst.com/cadspeed/topic/video-cards)
- [Mobile Workstations (36)](https://blog.cadalyst.com/cadspeed/topic/mobile-workstations)
- [Autodesk (35)](https://blog.cadalyst.com/cadspeed/topic/autodesk)
- [Windows (32)](https://blog.cadalyst.com/cadspeed/topic/windows)
- [Memory (28)](https://blog.cadalyst.com/cadspeed/topic/memory)
- [Operating System (28)](https://blog.cadalyst.com/cadspeed/topic/operating-system)
- [Operating Systems (26)](https://blog.cadalyst.com/cadspeed/topic/operating-systems)
- [Laptops (25)](https://blog.cadalyst.com/cadspeed/topic/laptops)
- [Upgrade (23)](https://blog.cadalyst.com/cadspeed/topic/upgrade)
- [AMD (21)](https://blog.cadalyst.com/cadspeed/topic/amd)
- [3D (20)](https://blog.cadalyst.com/cadspeed/topic/3d)
- [Dell Workstations (20)](https://blog.cadalyst.com/cadspeed/topic/dell-workstations)
- [A CAD Dinosaur's Journey into Modern Times (18)](https://blog.cadalyst.com/cadspeed/topic/a-cad-dinosaurs-journey-into-modern-times)
- [Printers (18)](https://blog.cadalyst.com/cadspeed/topic/printers)
- [Display (15)](https://blog.cadalyst.com/cadspeed/topic/display)
- [Displays (15)](https://blog.cadalyst.com/cadspeed/topic/displays)
- [CAD workstations (14)](https://blog.cadalyst.com/cadspeed/topic/cad-workstations)
- [Dell Business Workstation (13)](https://blog.cadalyst.com/cadspeed/topic/dell-business-workstation)
- [Multi-Threading (13)](https://blog.cadalyst.com/cadspeed/topic/multi-threading)
- [Backup System (11)](https://blog.cadalyst.com/cadspeed/topic/backup-system)
- [Intel (10)](https://blog.cadalyst.com/cadspeed/topic/intel)
- [SSD Drive (10)](https://blog.cadalyst.com/cadspeed/topic/ssd-drive)
- [64-Bit (9)](https://blog.cadalyst.com/cadspeed/topic/64-bit)
- [Accessories (9)](https://blog.cadalyst.com/cadspeed/topic/accessories)
- [WiFi (9)](https://blog.cadalyst.com/cadspeed/topic/wifi)
- [Facilities Management (8)](https://blog.cadalyst.com/cadspeed/topic/facilities-management)
- [Network (8)](https://blog.cadalyst.com/cadspeed/topic/network)
- [RAID (8)](https://blog.cadalyst.com/cadspeed/topic/raid)
- [Revit (8)](https://blog.cadalyst.com/cadspeed/topic/revit)
- [SOLIDWORKS (7)](https://blog.cadalyst.com/cadspeed/topic/solidworks)
- [Building Information Modeling (6)](https://blog.cadalyst.com/cadspeed/topic/building-information-modeling)
- [CAD Software (6)](https://blog.cadalyst.com/cadspeed/topic/cad-software)
- [Eyefinity (6)](https://blog.cadalyst.com/cadspeed/topic/eyefinity)
- [Remote Graphics (5)](https://blog.cadalyst.com/cadspeed/topic/remote-graphics)
- [Sustainability (5)](https://blog.cadalyst.com/cadspeed/topic/sustainability)
- [Vectorworks (5)](https://blog.cadalyst.com/cadspeed/topic/vectorworks)
- [32-Bit (4)](https://blog.cadalyst.com/cadspeed/topic/32-bit)
- [ArchiCAD (4)](https://blog.cadalyst.com/cadspeed/topic/archicad)
- [Benchmark (4)](https://blog.cadalyst.com/cadspeed/topic/benchmark)
- [Integrated Graphics (4)](https://blog.cadalyst.com/cadspeed/topic/integrated-graphics)
- [Large Format Printers (4)](https://blog.cadalyst.com/cadspeed/topic/large-format-printers)
- [Plotting (4)](https://blog.cadalyst.com/cadspeed/topic/plotting)
- [Visualization (4)](https://blog.cadalyst.com/cadspeed/topic/visualization)
- [Wide-Format Printers (4)](https://blog.cadalyst.com/cadspeed/topic/wide-format-printers)
- [3D modeling (3)](https://blog.cadalyst.com/cadspeed/topic/3d-modeling)
- [3ds Max Design (2)](https://blog.cadalyst.com/cadspeed/topic/3ds-max-design)
- [Solid Edge (2)](https://blog.cadalyst.com/cadspeed/topic/solid-edge)
- [TurboCAD (2)](https://blog.cadalyst.com/cadspeed/topic/turbocad)
- [Animation (1)](https://blog.cadalyst.com/cadspeed/topic/animation)
- [Apple (1)](https://blog.cadalyst.com/cadspeed/topic/apple)
- [Civil 3D (1)](https://blog.cadalyst.com/cadspeed/topic/civil-3d)
- [Creo Parametric (1)](https://blog.cadalyst.com/cadspeed/topic/creo-parametric)
- [Data Security (1)](https://blog.cadalyst.com/cadspeed/topic/data-security)
- [Desktop Virtualization (1)](https://blog.cadalyst.com/cadspeed/topic/desktop-virtualization)
- [Engineering (1)](https://blog.cadalyst.com/cadspeed/topic/engineering)
- [FEA Simulation (1)](https://blog.cadalyst.com/cadspeed/topic/fea-simulation)
- [FireWire (1)](https://blog.cadalyst.com/cadspeed/topic/firewire)
- [Infrastructure Modeler (1)](https://blog.cadalyst.com/cadspeed/topic/infrastructure-modeler)
- [Inventor (1)](https://blog.cadalyst.com/cadspeed/topic/inventor)
- [Macintosh (1)](https://blog.cadalyst.com/cadspeed/topic/macintosh)
- [Mapping (1)](https://blog.cadalyst.com/cadspeed/topic/mapping)
- [Monitors (1)](https://blog.cadalyst.com/cadspeed/topic/monitors)
- [Mouse (1)](https://blog.cadalyst.com/cadspeed/topic/mouse)
- [OpenCL (1)](https://blog.cadalyst.com/cadspeed/topic/opencl)
- [Print (1)](https://blog.cadalyst.com/cadspeed/topic/print)
- [Technology Makeover (1)](https://blog.cadalyst.com/cadspeed/topic/technology-makeover)
- [USB (1)](https://blog.cadalyst.com/cadspeed/topic/usb)
- [eSATA (1)](https://blog.cadalyst.com/cadspeed/topic/esata)

see all

![cadspeed_spacer.gif](https://blog.cadalyst.com/hs-fs/hubfs/cadspeed_spacer.gif?width=278&name=cadspeed_spacer.gif "cadspeed_spacer.gif")

![CADspeed -- Hardware for CAD applications](https://blog.cadalyst.com/hs-fs/hubfs/CADspeed_sidebar_red.jpg?width=240&name=CADspeed_sidebar_red.jpg "CADspeed -- Hardware for CAD applications")

[![Share on Facebook](https://static.hubspot.com/final/img/common/icons/social/facebook-24x24.png)](http://www.facebook.com/share.php?u=https%3A%2F%2Fblog.cadalyst.com%2Fcadspeed%2Fd784e8d6810da4d2fdae1350474ff225%3Futm_medium%3Dsocial%26utm_source%3Dfacebook) [![Share on LinkedIn](https://static.hubspot.com/final/img/common/icons/social/linkedin-24x24.png)](http://www.linkedin.com/shareArticle?mini=true&url=https%3A%2F%2Fblog.cadalyst.com%2Fcadspeed%2Fd784e8d6810da4d2fdae1350474ff225%3Futm_medium%3Dsocial%26utm_source%3Dlinkedin) [![Share on Twitter](https://static.hubspot.com/final/img/common/icons/social/twitter-24x24.png)](https://twitter.com/intent/tweet?original_referer=https%3A%2F%2Fblog.cadalyst.com%2Fcadspeed%2Fd784e8d6810da4d2fdae1350474ff225%3Futm_medium%3Dsocial%26utm_source%3Dtwitter&url=https%3A%2F%2Fblog.cadalyst.com%2Fcadspeed%2Fd784e8d6810da4d2fdae1350474ff225%3Futm_medium%3Dsocial%26utm_source%3Dtwitter&source=tweetbutton&text=Russell%20Bettenay%20-%202014-08-13%2011%3A07%3A05) [![Share on Email](https://static.hubspot.com/final/img/common/icons/social/email-24x24.png)](mailto:?subject=Check%20out%20https%3A%2F%2Fblog.cadalyst.com%2Fcadspeed%2Fd784e8d6810da4d2fdae1350474ff225%3Futm_medium%3Dsocial%26utm_source%3Demail%20&body=Check%20out%20https%3A%2F%2Fblog.cadalyst.com%2Fcadspeed%2Fd784e8d6810da4d2fdae1350474ff225%3Futm_medium%3Dsocial%26utm_source%3Demail)

[![Follow Cadalyst on Facebook](https://cdn2.hubspot.net/hub/358230/file-471050706-png/Img/social/facebook.png?width=64&name=facebook.png "Follow Cadalyst on Facebook")](http://www.facebook.com/Cadalyst)

[![Cadalyst RSS Feed](https://cdn2.hubspot.net/hub/358230/file-466921024-png/Img/social/rss.png?width=64&name=rss.png "Cadalyst RSS Feed")](https://www.cadalyst.com/rss.xml/category/38?__hstc=233546881.ac318d89a7eef6aa71f269330a5810c4.1426103379116.1426712382642.1427400960379.7&__hssc=233546881.2.1427400960379&__hsfp=1443885379)

[![Follow Cadalyst on Twitter](https://cdn2.hubspot.net/hub/358230/file-473997600-png/Img/social/twitter.png?width=64&name=twitter.png "Follow Cadalyst on Twitter")](https://twitter.com/Cadalyst_Mag)

[![Follow Cadalyst on YouTube](https://cdn2.hubspot.net/hub/358230/file-473997585-png/Img/social/youtube.png?width=64&name=youtube.png "Follow Cadalyst on YouTube")](https://www.youtube.com/user/cadalystvideos)

© 2026 Longitude Media, LLC

```json
{
  "@context" : "https://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "mediashower1",
    "url" : "https://blog.cadalyst.com/cadspeed/author/mediashower1"
  },
  "datePublished" : "2014-08-13T11:07:05.000Z",
  "headline" : "Russell Bettenay - 2014-08-13 11:07:05",
  "mainEntityOfPage" : {
    "@id" : "https://blog.cadalyst.com/cadspeed/d784e8d6810da4d2fdae1350474ff225",
    "@type" : "WebPage"
  },
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "url" : "https://blog.cadalyst.com/hubfs/Editorial%20-%20Misc/cadalyst_logo.gif"
    },
    "name" : "Longitude Media, LLC"
  }
}
```